{"c":"51-9197.00","n":"Tire Builders","d":"Operate machines to build tires.","g":"51","tasks":[{"t":"Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.","core":true,"id":14418,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Trim excess rubber and imperfections during retreading processes.","core":true,"id":14430,"r":65,"dt":"08/2020","src":"Incumbent"},{"t":"Fill cuts and holes in tires, using hot rubber.","core":true,"id":14425,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Place tires into molds for new tread.","core":false,"id":14431,"r":65,"dt":"08/2020","src":"Incumbent"},{"t":"Fit inner tubes and final layers of rubber onto tires.","core":false,"id":14423,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Buff tires according to specifications for width and undertread depth.","core":false,"id":21215,"r":65,"dt":"08/2020","src":"Incumbent"},{"t":"Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.","core":false,"id":14426,"r":63,"dt":"08/2020","src":"Incumbent"},{"t":"Start rollers that bond tread and plies as drums revolve.","core":false,"id":14411,"r":63,"dt":"08/2020","src":"Incumbent"},{"t":"Align treads with guides, start drums to wind treads onto plies, and slice ends.","core":false,"id":14415,"r":63,"dt":"08/2020","src":"Incumbent"},{"t":"Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.","core":false,"id":14413,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Measure tires to determine mold size requirements.","core":false,"id":14428,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings.","core":false,"id":14427,"r":62,"dt":"08/2020","src":"Incumbent"},{"t":"Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.","core":false,"id":14417,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Cut plies at splice points, and press ends together to form continuous bands.","core":false,"id":14414,"r":63,"dt":"08/2020","src":"Incumbent"},{"t":"Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies.","core":false,"id":14410,"r":62,"dt":"08/2020","src":"Incumbent"},{"t":"Clean and paint completed tires.","core":false,"id":14422,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Rub cement sticks on drum edges to provide adhesive surfaces for plies.","core":false,"id":14424,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Depress pedals to collapse drums after processing is complete.","core":false,"id":14429,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Wind chafers and breakers onto plies.","core":false,"id":14419,"r":64,"dt":"08/2020","src":"Incumbent"},{"t":"Pull plies from supply racks, and align plies with edges of drums.","core":false,"id":14420,"r":64,"dt":"08/2020","src":"Incumbent"}]}