{"c":"51-9195.03","n":"Stone Cutters and Carvers, Manufacturing","d":"Cut or carve stone according to diagrams and patterns.","g":"51","tasks":[{"t":"Verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments.","core":true,"id":12615,"r":92,"dt":"07/2015","src":"Incumbent"},{"t":"Move fingers over surfaces of carvings to ensure smoothness of finish.","core":true,"id":12621,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.","core":true,"id":12619,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Lay out designs or dimensions from sketches or blueprints on stone surfaces, freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments.","core":true,"id":12616,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.","core":true,"id":12624,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns.","core":true,"id":12618,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Select chisels, pneumatic or surfacing tools, or sandblasting nozzles, and determine sequence of use.","core":true,"id":12620,"r":89,"dt":"07/2015","src":"Incumbent"},{"t":"Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques.","core":false,"id":12617,"r":89,"dt":"07/2015","src":"Incumbent"},{"t":"Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans.","core":false,"id":12614,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools.","core":false,"id":12622,"r":92,"dt":"07/2015","src":"Incumbent"},{"t":"Guide nozzles over stone, following stencil outlines, or chip along marks to create designs or to work surfaces down to specified finishes.","core":false,"id":12623,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Smooth surfaces of carvings, using rubbing stones.","core":false,"id":12625,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets.","core":false,"id":12628,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Dress stone surfaces, using bushhammers.","core":false,"id":12629,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Remove or add stencils during blasting to create differing cut depths, intricate designs, or rough, pitted finishes.","core":false,"id":12626,"r":89,"dt":"07/2015","src":"Incumbent"},{"t":"Copy drawings on rough clay or plaster models.","core":false,"id":12627,"r":90,"dt":"07/2015","src":"Incumbent"}]}