{"c":"51-9194.00","n":"Etchers and Engravers","d":"Engrave or etch metal, wood, rubber, or other materials. Includes such workers as etcher-circuit processors, pantograph engravers, and silk screen etchers.","g":"51","tasks":[{"t":"Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.","core":true,"id":14395,"r":65,"dt":"07/2017","src":"Incumbent"},{"t":"Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.","core":true,"id":14386,"r":65,"dt":"07/2017","src":"Incumbent"},{"t":"Clean and polish engraved areas.","core":true,"id":14385,"r":63,"dt":"07/2017","src":"Incumbent"},{"t":"Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.","core":false,"id":14396,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.","core":false,"id":14379,"r":62,"dt":"07/2017","src":"Incumbent"},{"t":"Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.","core":false,"id":14388,"r":63,"dt":"07/2017","src":"Incumbent"},{"t":"Use computer software to design patterns for engraving.","core":false,"id":21027,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.","core":false,"id":14409,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.","core":false,"id":14378,"r":62,"dt":"07/2017","src":"Incumbent"},{"t":"Measure and compute dimensions of lettering, designs, or patterns to be engraved.","core":false,"id":14383,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.","core":false,"id":14394,"r":65,"dt":"07/2017","src":"Incumbent"},{"t":"Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.","core":false,"id":14382,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.","core":false,"id":14399,"r":65,"dt":"07/2017","src":"Incumbent"},{"t":"Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.","core":false,"id":14392,"r":63,"dt":"07/2017","src":"Incumbent"},{"t":"Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.","core":false,"id":14398,"r":62,"dt":"07/2017","src":"Incumbent"},{"t":"Position and clamp workpieces, plates, or rollers in holding fixtures.","core":false,"id":14380,"r":63,"dt":"07/2017","src":"Incumbent"},{"t":"Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.","core":false,"id":14404,"r":63,"dt":"07/2017","src":"Incumbent"},{"t":"Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.","core":false,"id":14401,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Start machines and lower cutting tools to beginning points on patterns.","core":false,"id":14384,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.","core":false,"id":14381,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Remove completed workpieces and place them in trays.","core":false,"id":14402,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Insert cutting tools or bits into machines and secure them with wrenches.","core":false,"id":14397,"r":62,"dt":"07/2017","src":"Incumbent"},{"t":"Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.","core":false,"id":14391,"r":63,"dt":"07/2017","src":"Incumbent"},{"t":"Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.","core":false,"id":14400,"r":64,"dt":"07/2017","src":"Incumbent"},{"t":"Fill etched characters with opaque paste to improve readability.","core":false,"id":14407,"r":62,"dt":"07/2017","src":"Incumbent"},{"t":"Brush or wipe acid over engraving to darken or highlight inscriptions.","core":false,"id":14408,"r":64,"dt":"07/2017","src":"Incumbent"}]}