{"c":"51-7042.00","n":"Woodworking Machine Setters, Operators, and Tenders, Except Sawing","d":"Set up, operate, or tend woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, and wood nailing machines. May operate computer numerically controlled (CNC) equipment.","g":"51","tasks":[{"t":"Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.","core":true,"id":12279,"r":88,"dt":"07/2015","src":"Incumbent"},{"t":"Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.","core":true,"id":12281,"r":89,"dt":"07/2015","src":"Incumbent"},{"t":"Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.","core":true,"id":12274,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.","core":true,"id":12278,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Examine raw woodstock for defects and to ensure conformity to size and other specification standards.","core":true,"id":12291,"r":87,"dt":"07/2015","src":"Incumbent"},{"t":"Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.","core":true,"id":12277,"r":88,"dt":"07/2015","src":"Incumbent"},{"t":"Install and adjust blades, cutterheads, boring-bits, or sanding-belts, using hand tools and rules.","core":true,"id":12282,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Change alignment and adjustment of sanding, cutting, or boring machine guides to prevent defects in finished products, using hand tools.","core":true,"id":12285,"r":88,"dt":"07/2015","src":"Incumbent"},{"t":"Determine product specifications and materials, work methods, and machine setup requirements, according to blueprints, oral or written instructions, drawings, or work orders.","core":true,"id":12275,"r":88,"dt":"07/2015","src":"Incumbent"},{"t":"Feed stock through feed mechanisms or conveyors into planing, shaping, boring, mortising, or sanding machines to produce desired components.","core":true,"id":12276,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Push or hold workpieces against, under, or through cutting, boring, or shaping mechanisms.","core":true,"id":12284,"r":86,"dt":"07/2015","src":"Incumbent"},{"t":"Select knives, saws, blades, cutter heads, cams, bits, or belts, according to workpiece, machine functions, or product specifications.","core":true,"id":12280,"r":88,"dt":"07/2015","src":"Incumbent"},{"t":"Remove and replace worn parts, bits, belts, sandpaper, or shaping tools.","core":true,"id":12287,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Secure woodstock against a guide or in a holding device, place woodstock on a conveyor, or dump woodstock in a hopper to feed woodstock into machines.","core":true,"id":12288,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Inspect and mark completed workpieces and stack them on pallets, in boxes, or on conveyors so that they can be moved to the next workstation.","core":true,"id":12283,"r":88,"dt":"07/2015","src":"Incumbent"},{"t":"Inspect pulleys, drive belts, guards, or fences on machines to ensure that machines will operate safely.","core":true,"id":12286,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Clean or maintain products, machines, or work areas.","core":true,"id":12289,"r":89,"dt":"07/2015","src":"Incumbent"},{"t":"Attach and adjust guides, stops, clamps, chucks, or feed mechanisms, using hand tools.","core":true,"id":12290,"r":87,"dt":"07/2015","src":"Incumbent"},{"t":"Trim wood parts according to specifications, using planes, chisels, or wood files or sanders.","core":true,"id":12295,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Grease or oil woodworking machines.","core":true,"id":20823,"r":89,"dt":"07/2015","src":"Incumbent"},{"t":"Unclamp workpieces and remove them from machines.","core":false,"id":12296,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Start machines and move levers to engage hydraulic lifts that press woodstocks into desired forms and disengage lifts after appropriate drying times.","core":false,"id":12297,"r":91,"dt":"07/2015","src":"Incumbent"},{"t":"Operate gluing machines to glue pieces of wood together, or to press and affix wood veneer to wood surfaces.","core":false,"id":12293,"r":89,"dt":"07/2015","src":"Incumbent"},{"t":"Set up, program, or control computer-aided design (CAD) or computer numerical control (CNC) machines.","core":false,"id":12292,"r":90,"dt":"07/2015","src":"Incumbent"},{"t":"Control hoists to remove parts or products from work stations.","core":false,"id":12298,"r":90,"dt":"07/2015","src":"Incumbent"}]}