{"c":"49-3052.00","n":"Motorcycle Mechanics","d":"Diagnose, adjust, repair, or overhaul motorcycles, scooters, mopeds, dirt bikes, or similar motorized vehicles.","g":"49","tasks":[{"t":"Mount, balance, change, or check condition or pressure of tires.","core":true,"id":20651,"r":51,"dt":"08/2021","src":"Incumbent"},{"t":"Replace defective parts, using hand tools, arbor presses, flexible power presses, or power tools.","core":true,"id":8353,"r":51,"dt":"08/2021","src":"Incumbent"},{"t":"Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, or generators.","core":true,"id":8357,"r":52,"dt":"08/2021","src":"Incumbent"},{"t":"Connect test panels to engines and measure generator output, ignition timing, or other engine performance indicators.","core":true,"id":8354,"r":51,"dt":"08/2021","src":"Incumbent"},{"t":"Listen to engines, examine vehicle frames, or confer with customers to determine nature and extent of malfunction or damage.","core":true,"id":8355,"r":52,"dt":"08/2021","src":"Incumbent"},{"t":"Repair or replace other parts, such as headlights, horns, handlebar controls, gasoline or oil tanks, starters, or mufflers.","core":true,"id":8359,"r":51,"dt":"08/2021","src":"Incumbent"},{"t":"Disassemble subassembly units and examine condition, movement, or alignment of parts, visually or using gauges.","core":true,"id":8360,"r":51,"dt":"08/2021","src":"Incumbent"},{"t":"Repair or adjust motorcycle subassemblies, such as forks, transmissions, brakes, or drive chains, according to specifications.","core":true,"id":8352,"r":52,"dt":"08/2021","src":"Incumbent"},{"t":"Reassemble frames and reinstall engines after repairs.","core":true,"id":20652,"r":51,"dt":"08/2021","src":"Incumbent"},{"t":"Remove cylinder heads and grind valves to scrape off carbon and replace defective valves, pistons, cylinders, or rings, using hand and power tools.","core":true,"id":8358,"r":52,"dt":"08/2021","src":"Incumbent"},{"t":"Install motorcycle accessories.","core":true,"id":23934,"r":52,"dt":"08/2021","src":"Incumbent"},{"t":"Reassemble and test subassembly units.","core":true,"id":8356,"r":51,"dt":"08/2021","src":"Incumbent"},{"t":"Hammer out dents and bends in frames and weld tears and breaks.","core":false,"id":20653,"r":51,"dt":"08/2021","src":"Incumbent"}]}