{"c":"49-3021.00","n":"Automotive Body and Related Repairers","d":"Repair and refinish automotive vehicle bodies and straighten vehicle frames.","g":"49","tasks":[{"t":"File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools.","core":true,"id":2933,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling.","core":true,"id":18580,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools.","core":true,"id":2943,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Prime and paint repaired surfaces, using paint sprayguns and motorized sanders.","core":true,"id":2938,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Follow supervisors' instructions as to which parts to restore or replace and how much time the job should take.","core":true,"id":2935,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint.","core":true,"id":2934,"r":46,"dt":"08/2019","src":"Incumbent"},{"t":"Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components.","core":true,"id":2941,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers.","core":true,"id":2944,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete.","core":true,"id":2937,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Review damage reports, prepare or review repair cost estimates, and plan work to be performed.","core":true,"id":2946,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Fill small dents that cannot be worked out with plastic or solder.","core":true,"id":2942,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Remove damaged sections of vehicles using metal-cutting guns, air grinders and wrenches, and install replacement parts using wrenches or welding equipment.","core":true,"id":2936,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Remove small pits and dimples in body metal, using pick hammers and punches.","core":true,"id":2947,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders.","core":true,"id":2948,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Mix polyester resins and hardeners to be used in restoring damaged areas.","core":true,"id":2940,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Fit and secure windows, vinyl roofs, and metal trim to vehicle bodies, using caulking guns, adhesive brushes, and mallets.","core":true,"id":2954,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Adjust or align headlights, wheels, and brake systems.","core":true,"id":2950,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Replace damaged glass on vehicles.","core":true,"id":2956,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Remove damaged panels, and identify the family and properties of the plastic used on a vehicle.","core":true,"id":2945,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Apply heat to plastic panels, using hot-air welding guns or immersion in hot water, and press the softened panels back into shape by hand.","core":true,"id":2951,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Clean work areas, using air hoses, to remove damaged material and discarded fiberglass strips used in repair procedures.","core":true,"id":2949,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Soak fiberglass matting in resin mixtures and apply layers of matting over repair areas to specified thicknesses.","core":true,"id":2952,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Read specifications or confer with customers to determine the desired custom modifications for altering the appearance of vehicles.","core":false,"id":2955,"r":46,"dt":"08/2019","src":"Incumbent"},{"t":"Cut openings in vehicle bodies for the installation of customized windows, using templates and power shears or chisels.","core":false,"id":2953,"r":47,"dt":"08/2019","src":"Incumbent"},{"t":"Measure and mark vinyl material and cut material to size for roof installation, using rules, straightedges, and hand shears.","core":false,"id":2957,"r":46,"dt":"08/2019","src":"Incumbent"}]}