{"c":"47-2082.00","n":"Tapers","d":"Seal joints between plasterboard or other wallboard to prepare wall surface for painting or papering.","g":"47","tasks":[{"t":"Spread sealing compound between boards or panels or over cracks, holes, nail heads, or screw heads, using trowels, broadknives, or spatulas.","core":true,"id":13530,"r":65,"dt":"07/2015","src":"Incumbent"},{"t":"Press paper tape over joints to embed tape into sealing compound and to seal joints.","core":true,"id":13531,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Apply additional coats to fill in holes and make surfaces smooth.","core":true,"id":13537,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Seal joints between plasterboard or other wallboard to prepare wall surfaces for painting or papering.","core":true,"id":13534,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Spread and smooth cementing material over tape, using trowels or floating machines to blend joints with wall surfaces.","core":true,"id":13533,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Sand or patch nicks or cracks in plasterboard or wallboard.","core":true,"id":13535,"r":65,"dt":"07/2015","src":"Incumbent"},{"t":"Mix sealing compounds by hand or with portable electric mixers.","core":true,"id":13532,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Work on high ceilings, using scaffolding or other tools, such as stilts.","core":true,"id":20788,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Select the correct sealing compound or tape.","core":true,"id":13541,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Countersink nails or screws below surfaces of walls before applying sealing compounds, using hammers or screwdrivers.","core":true,"id":13540,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Remove extra compound after surfaces have been covered sufficiently.","core":true,"id":13529,"r":63,"dt":"07/2015","src":"Incumbent"},{"t":"Install metal molding at wall corners to secure wallboard.","core":true,"id":13538,"r":64,"dt":"07/2015","src":"Incumbent"},{"t":"Apply texturizing compounds or primers to walls or ceilings before final finishing, using trowels, brushes, rollers, or spray guns.","core":true,"id":13542,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Check adhesives to ensure that they will work and will remain durable.","core":true,"id":13543,"r":66,"dt":"07/2015","src":"Incumbent"},{"t":"Sand rough spots of dried cement between applications of compounds.","core":true,"id":13539,"r":65,"dt":"07/2015","src":"Incumbent"},{"t":"Use mechanical applicators that spread compounds and embed tape in one operation.","core":true,"id":13536,"r":65,"dt":"07/2015","src":"Incumbent"}]}