{"c":"47-2044.00","n":"Tile and Stone Setters","d":"Apply hard tile, stone, and comparable materials to walls, floors, ceilings, countertops, and roof decks.","g":"47","tasks":[{"t":"Align and straighten tile using levels, squares, and straightedges.","core":true,"id":2848,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Finish and dress the joints and wipe excess grout from between tiles, using damp sponge.","core":true,"id":2851,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Cut and shape tile to fit around obstacles and into odd spaces and corners, using hand and power cutting tools.","core":true,"id":2850,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Determine and implement the best layout to achieve a desired pattern.","core":true,"id":2849,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.","core":true,"id":2853,"r":56,"dt":"08/2023","src":"Incumbent"},{"t":"Study blueprints and examine surface to be covered to determine amount of material needed.","core":true,"id":2859,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Measure and mark surfaces to be tiled, following blueprints.","core":true,"id":2855,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Lay and set mosaic tiles to create decorative wall, mural, and floor designs.","core":true,"id":2864,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Apply mortar to tile back, position the tile, and press or tap with trowel handle to affix tile to base.","core":true,"id":2852,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.","core":true,"id":2869,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Apply a sealer to make grout stain- and water-resistant.","core":true,"id":2871,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Level concrete and allow to dry.","core":true,"id":2856,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Measure and cut metal lath to size for walls and ceilings, using tin snips.","core":true,"id":2867,"r":56,"dt":"08/2023","src":"Incumbent"},{"t":"Install and anchor fixtures in designated positions, using hand tools.","core":true,"id":2861,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat to a metal screen.","core":true,"id":2858,"r":56,"dt":"08/2023","src":"Incumbent"},{"t":"Remove and replace cracked or damaged tile.","core":true,"id":2866,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Cut tile backing to required size, using shears.","core":true,"id":2862,"r":55,"dt":"08/2023","src":"Incumbent"},{"t":"Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.","core":true,"id":2863,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units.","core":true,"id":2860,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Spread mastic or other adhesive base on roof deck to form base for promenade tile, using serrated spreader.","core":false,"id":2870,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Assist customers in selection of tile and grout.","core":false,"id":2865,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Prepare cost and labor estimates, based on calculations of time and materials needed for project.","core":false,"id":2854,"r":56,"dt":"08/2023","src":"Incumbent"},{"t":"Brush glue onto manila paper on which design has been drawn and position tiles, finished side down, onto paper.","core":false,"id":2872,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications.","core":false,"id":2868,"r":57,"dt":"08/2023","src":"Incumbent"},{"t":"Build underbeds and install anchor bolts, wires, and brackets.","core":false,"id":2857,"r":56,"dt":"08/2023","src":"Incumbent"}]}