{"c":"47-2042.00","n":"Floor Layers, Except Carpet, Wood, and Hard Tiles","d":"Apply blocks, strips, or sheets of shock-absorbing, sound-deadening, or decorative coverings to floors.","g":"47","tasks":[{"t":"Sweep, scrape, sand, or chip dirt and irregularities to clean base surfaces, correcting imperfections that may show through the covering.","core":true,"id":8253,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Cut flooring material to fit around obstructions.","core":true,"id":8254,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Inspect surface to be covered to ensure that it is firm and dry.","core":true,"id":8255,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Trim excess covering materials, tack edges, and join sections of covering material to form tight joint.","core":true,"id":8256,"r":79,"dt":"12/2005","src":"Incumbent"},{"t":"Form a smooth foundation by stapling plywood or Masonite over the floor or by brushing waterproof compound onto surface and filling cracks with plaster, putty, or grout to seal pores.","core":true,"id":8257,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Measure and mark guidelines on surfaces or foundations, using chalk lines and dividers.","core":true,"id":8258,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Cut covering and foundation materials, according to blueprints and sketches.","core":true,"id":8259,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Roll and press sheet wall and floor covering into cement base to smooth and finish surface, using hand roller.","core":true,"id":8260,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Apply adhesive cement to floor or wall material to join and adhere foundation material.","core":true,"id":8261,"r":79,"dt":"12/2005","src":"Incumbent"},{"t":"Determine traffic areas and decide location of seams.","core":true,"id":8262,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Lay out, position, and apply shock-absorbing, sound-deadening, or decorative coverings to floors, walls, and cabinets, following guidelines to keep courses straight and create designs.","core":true,"id":8263,"r":78,"dt":"12/2005","src":"Incumbent"},{"t":"Remove excess cement to clean finished surface.","core":true,"id":8264,"r":80,"dt":"12/2005","src":"Incumbent"},{"t":"Disconnect and remove appliances, light fixtures, and worn floor and wall covering from floors, walls, and cabinets.","core":true,"id":8265,"r":79,"dt":"12/2005","src":"Incumbent"},{"t":"Heat and soften floor covering materials to patch cracks or fit floor coverings around irregular surfaces, using blowtorch.","core":false,"id":8266,"r":80,"dt":"12/2005","src":"Incumbent"}]}