{"c":"47-2041.00","n":"Carpet Installers","d":"Lay and install carpet from rolls or blocks on floors. Install padding and trim flooring materials.","g":"47","tasks":[{"t":"Inspect the surface to be covered to determine its condition, and correct any imperfections that might show through carpet or cause carpet to wear unevenly.","core":true,"id":2835,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Roll out, measure, mark, and cut carpeting to size with a carpet knife, following floor sketches and allowing extra carpet for final fitting.","core":true,"id":2836,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Join edges of carpet and seam edges where necessary, by sewing or by using tape with glue and heated carpet iron.","core":true,"id":2833,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Cut and trim carpet to fit along wall edges, openings, and projections, finishing the edges with a wall trimmer.","core":true,"id":2834,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Plan the layout of the carpet, allowing for expected traffic patterns and placing seams for best appearance and longest wear.","core":true,"id":2837,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Stretch carpet to align with walls and ensure a smooth surface, and press carpet in place over tack strips or use staples, tape, tacks or glue to hold carpet in place.","core":true,"id":2838,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Take measurements and study floor sketches to calculate the area to be carpeted and the amount of material needed.","core":true,"id":2839,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Install carpet on some floors using adhesive, following prescribed method.","core":true,"id":2841,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Clean up before and after installation, including vacuuming carpet and discarding remnant pieces.","core":true,"id":20142,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Measure, cut and install tackless strips along the baseboard or wall.","core":true,"id":2844,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Nail tack strips around area to be carpeted or use old strips to attach edges of new carpet.","core":true,"id":2842,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Cut carpet padding to size and install padding, following prescribed method.","core":true,"id":2840,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Fasten metal treads across door openings or where carpet meets flooring to hold carpet in place.","core":true,"id":2843,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Draw building diagrams and record dimensions.","core":true,"id":2845,"r":83,"dt":"07/2011","src":"Incumbent"},{"t":"Move furniture from area to be carpeted and remove old carpet and padding.","core":true,"id":2846,"r":85,"dt":"07/2011","src":"Incumbent"},{"t":"Cut and bind material.","core":true,"id":2847,"r":85,"dt":"07/2011","src":"Incumbent"}]}